R/C Tech Forums - View Single Post - AMP Draw?
Thread: AMP Draw?
View Single Post
Old 04-29-2017 | 06:37 AM
  #6  
billdelong
Tech Champion
iTrader: (33)
 
Joined: Mar 2011
Posts: 6,410
From: Austin,TX
Default

You will pull the most power coming from a dead stop, as you reach full throttle, the power draw will taper away.

For 17.5T Blinky in a 1/10 TC, any 35A ESC (or higher) will do fine, best one for the money is this one here:
https://www.hobbywingdirect.com/prod...ant=4976390148

Suitable Car: 1/10, 1/12 on-road or off-road SPEC race (Zero timing race).
Suitable Motor: With 2S LiPo or 4-6 cell NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T
With 3S LiPo or 7-9 cell NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T
billdelong is offline