Also the settings show a V Offset of -0.7 going from the AM06 to AM06M (which on the awesomatix info the AM06M is 13.58 vs 14.35 so around -0.7mm narrower but how do you account for the height difference, the AM06M is also shorter. I recall awesomatix saying to maintain the same roll centre you had to remove 2.5mm from the inner camber link. The A800 later ones had a AM06W Hub which was same height as the AM06 but 0.65mm wider again, and the A800X has a AM06WL hub which is the same width as the AM06W but 0.75mm higher.