Originally Posted by
Randy_Pike
That number is a value we use to determine the throttle calibration point. Your model maybe a little different between the two. For example if you calibrate at 100% on your epa's vs 140 or 150% on some radios will show a different value in the data log.
As long as you're getting WOT or wide open throttle which you can verify with your ESC's LED tree showing all LED's ramping up and flashing you're good to go.
ok, sounds reasonable. It was the very slight fluctuation I was worried about.
On the ESC it does show the lights ramp up on throttle and does show full blinky at full.
I was thinking the datalogging was showing that the throttle was very slightly flickering from 100% to like 99%. I've set the endpoints on the esc to the radio several times with the same result.