First off, it was great racing against you and Wayne, as well as the other Mini drivers, on the weekend.

In regards to the M05 setup, my M05 v.2 is setup for mid wheelbase length, running the Blitz Golf GTi shell.

I am also using the 3 Racing gear diff with 100k weight oil in it.

I am currently running 30wt oil all round in my Mini TRF shocks, with yellow springs on the front and white on the back. I use the Tamiya aluminium front shock tower, with the front shock in the middle hole.

I barely run any front toe, but YMMV when it comes to that.

I do recommend going for a Tamiya aluminium steering rack setup in the Mini. It will make a world of different. I use the Tamiya red rubber o-rings in my steering to remove slop, and haven't had any issues there. Most of the Mini lads at Boronia also do the same thing.

I can't remember the weight setup on my car, I think mine is a bit overweight due to me replacing all the Phillips head screws with steel button head/countersunk hex head screws.

I couldn't remember which shell you were using for your M05, the GTi seems to be the flavour of the month due to the monstrous rear wing you get with it.