R/C Tech Forums - View Single Post - Introducing myself
Thread: Introducing myself
View Single Post
Old 03-21-2017 | 08:45 AM
  #2  
v_squared
Tech Fanatic
iTrader: (53)
 
Joined: Feb 2012
Posts: 783
Default
Hey Geremy welcome to Madison. I have had great experience with these motors:

https://hobbyking.com/en_us/turnigy-...-approved.html

In terms speed control I normally use tekin. But here is a cheap one from HobbyKing.

https://hobbyking.com/en_us/turnigy-...-approved.html

I would suggest picking up a used tekin. You can get them here on rctech for about 60. Anyway hope this helps you get going. If you still have more questions feel free to message me or stop by the track again.

Vue

Originally Posted by GeremyD
Good Morning. My name is Geremy my family and I just moved here from Charlotte, NC and now reside in Reedsburg. We came by the track this past Saturday to check it out you may have seen my wife, son and I.

I am getting back into the hobby after a 10 year hiatus. I use to run pancars in (Nastruck) bodies on pavement.

Matt mentioned you run brushless motors from hobbyking could you post a budget motor/esc I could run in my traxxas slash 2wd using the stock radio?

Thanks for the warm welcome and I look forward to see you all at the track.

Geremy
v_squared is offline  
Reply