So here's my carpet set-up, I pretty much emulated AE Stigs recommendations:
B64D
slipper 81/26 13.5T
Slipper dogbone set (where only the rear dogbone is different)
2 orings in front slipper outdrive, 3 in slipper rear outdrive
purple springs up front, 1.6 x 2 with 37.5 wt
gray spring in the rear 1.7 x 2 with 30 wt
17mm ride height
7° caster blocks
5mm front hexes
AE aluminum steering rack
camber links inside on shock tower, 2nd hole up from bottom front an rear
yellow swaybar up front
orange (front swaybar) in the rear
2° camber all the way around
about 2° of toe out
Schumacher cut staggers yellow up front
JConcepts Pin Downs in the rear
I havent gotten a chance to try it yet, last Thursday's practice was cancelled due to our blizzard. Looking forward to getting it on the track. Our track is ozite, small to medium, longest straight away is about 70-80ft.
Think I'm in the ball park?