R/C Tech Forums - View Single Post - Tekno ET48 Thread
Thread: Tekno ET48 Thread
View Single Post
Old 03-13-2017 | 05:26 PM
  #5231  
Mopar2Ya's Avatar
Mopar2Ya
Tech Regular
 
Joined: Nov 2014
Posts: 357
Default
Originally Posted by CaptCarnage
Mopar was right.
I just recvd some street tires that rubbed on the front arms. easy to dremmel wheels. Hexes on wheels were too wide for the stock hexes on the rear of the truck and hit the hubs. Not Proline though. Ordered 2mm wider hexes and new PL MX wheel/tire combos.
Thanks for the correct info.
I have an et48.1 & a EB48.3. I never tried the stock ET48.1 hexes, but the EB48.3 stock hexes are too thin, I believe this is what you're referring too. I was also thinking the wheel may contact the arm at full lock, w/stock hexes.
Mopar2Ya is offline  
Reply