Originally Posted by
damang999
Hi all
I have been running my m05 on carpert for the past 6 months and the setup has been pretty sweet running m and s grips .
The local group has left the carpet and now running on ashpalt and running on shimizu 60d slicks .
My car is really lacking turn in in the medium to fast corners.
Setup is as follows
Tamiya big bores 50w front 40w rear with blue front springs and yellow rears with 3 hole pistons
Ride height around 6 to 7mm
Gear diff with 10k oil
Stock silver can motor.
Tires.I have tried hard fronts medium rears then medium front soft rear .
Medium wheelbase
Im thinking im a little heavy on the shocks? Car was consistanly fast on carpet . I have never run on road ashpalt before so im a little lost for direction and any help would be appreciated
I have m05 running on asphalt and its had a lot of grip, no happy back
Here's my setup:
-Track indoor asphalt with tight cornering layout
-3racing Suspension 3holes piston all around 50mm length with tamiya damper oil (front:500,rear:600) with front trf blue spring white spring with blue dot, and rear full blue color spring (trf blue dpt is slightly harder than the standard blue spring)
-im using type b tires (i know it's for outdoor hot track but it work brilliant!
Ps. Before running i always use tire traction to break in the tires to work perfectly on cold indoor asphalt track
-medium wheelbase
-ride height about 4mm all around
-suzuki swift bodyshell
-ta03 ball diff it set fully tighten the balldiff screw with extra shims about 0.4mm (almost locked 😁😁😁
-10.5t brushless motor