Originally Posted by
kmas
what spares would you recommend for a indoor carpet track. I have a f1r3 now, I have extra lower arms, I have some decent tires, electrics, but I have no tuning items or gearing. Could you guys provide me with a list of recommendations for my pit box. I dont have tuning tools either........thx for any help
As far as tuning tools, a 4mm wrench for the turnbuckles is all you'll need for the front end. Also, the front happens to be set to 2 degrees camber, about 3 degrees toe out, and 7 degrees caster. As for the rear, the side spring preload is adjustable by thumb, and the axle ride height adjusters are from Tamiya so you should have a set. I think I sent the car to you with 1mm offset axle spacers.
I also use a tweak station, especially with the adjustable side springs, it may be possible preload the springs unevenly and get some tweak without knowing it.