R/C Tech Forums - View Single Post - Official Tekin RS GEN2 1/10 ESC Thread
Thread: Official Tekin RS GEN2 1/10 ESC Thread
View Single Post
Old 02-17-2017, 07:05 AM
  #340  
yzracer758
Team Tekin
iTrader: (18)
 
yzracer758's Avatar
 
Join Date: Apr 2008
Location: Tekin HQ
Posts: 3,030
Trader Rating: 18 (100%+)
Default
Originally Posted by corider
Purchased a used buggy with a Tekin RS Gen 2 in it. I hooked everything up and did the factory reset holding down both buttons on the esc and then began setting up the esc. The esc calibrates properly with my remote and runs. The esc will not hold my setting as is flashing 3,4,5, and then 1 repeatedly. Reading the instructions this appears to be "big event lockout mode". The directions say this can only be removed via Hotwire link. Is this the case that a factory reset will not reset this esc when it is in the mode and I need Hotwire to unlock it?
Yes, when the unit is placed in the "locked Spec Mode" via the hotwire, the only way to undo it is by hooking it back up to a hotwire.
yzracer758 is offline  
Reply