Originally posted by HarKonnenD
This I noted from the start. Using the stock setup the LW 2speed on first gear wobbled a bit due to a little xtra slack. That spacer included is NOT ENOUGH! There is a small amount of space between the E clip on the 2speed side. For a simple fix, use the washer for glowplugs and install it on the shaft over the included spacer. This will eliminate that wobble. It never caused me a problem before, but now with the clutch engaging properly offline, the gears started shaving a tiny bit. Now, it's perfect!
you may have worn a little on the bulk head from the old tw spd it does scrape a little