rzein

Circuit Téléguidé St-Hyacinthe is proud to present the 3rd edition of Quebec Onroad National

Classes

Sedan 17.5T Stock
o Any 1/10 scale, 190mm, 4wd touring car
o Any ROAR approved 17.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,350grs
o Minimum height 5mm
o Tires: Jaco Blue byo - Available at the track
o 2S 7.4v ROAR approved Maximum 8.44v

Sedan Mod
o Any 1/10 scale, 190mm, 4wd touring car
o Any brushless motor (540 size can)
o Any ESC – ROAR approved
o Weight Minimum 1,350grs
o Minimum height 5mm
o Tires: Jaco Blue byo - Available at the track
o 2S 7.4v ROAR approved Maximum 8.44v

Pancar 17.5T Stock
o Any ROAR approved 17.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 730grs
o Minimum height 3mm
o Spec tires BSR or CRC only - available at the track
o 1S 3.7v ROAR approved Maximum 4.22v

Pancar Mod
o Any brushless motor (540 size can)
o Any ESC blinky mode ROAR approved
o Weight Minimum 730grs
o Minimum height 3mm
o tires: open
o 1S 3.7v ROAR approved Maximum 4.22v

Can-Am/USGT
o Any 1/10 scale, 190mm, 4wd or FWD touring car
o Any ROAR approved 21.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,380grs (4WD)
o Weight Minimum 1,200grs (FWD)
o Tire = GRC124 (Pre-mounted), GRC125 (tires only), Ride 24025
o Minimum height 5mm
o 2S 7.4v ROAR approved Maximum 8.44v

F1
o Any 190mm, 2wd rear wheel drive Formula 1 Chassis. 270mm wheelbase max
o Any ROAR approved 21.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,050grs
o Any commercially available F1-specific rubber tire may be used, any tire inserts can be used
o Minimum height 3mm
o 2S 7.4v ROAR approved Maximum 8.44v

VTA
o Any 1/10 scale, 190mm, 4wd touring car
o Any ROAR approved 25.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,450grs
o Minimum height 5mm
o 2S 7.4v ROAR approved Maximum 8.44v

http://www.usvintagetransam.com/rules/

Tamiya Mini
o Legal chassis platforms: M03, M05, M05 V2 and M06
o Silver can motor
o Any ESC ROAR approved
o Weight Minimum 1,300grs
o Tamiya internal gears only. Aftermarket idler and spur gears are not legal
o Tamiya Mini tires (55mm and 60mm)
o Bodies available for use with M03, M05 and M06 are legal and may be used on any chassis platform. (No sedan bodies allowed)
o 2S 7.4v ROAR approved Maximum 8.44v

NOTE: Min 10 entries to run a class

Entry Fee and registration: http://events.rcsignup.com/events/di...nt.cfm?ID=5532

- 1st Class= $40, 2nd Class =$20 and 3rd Class = $15
- VIP member 1st Class= $20, 2nd Class = $10 and 3rd = $5
- Entry Deadline April 25th, 2016
- Entry Fees thru PayPal: [email protected]

Track
Race will be held at Circuit Téléguidé St-Hyacinthe Facility
15075 Ave Guy St-Hyacinthe, QC
Permitted traction compound = SXT 3.0
Pit tables, chairs, & power sources will be provided
LiPo battery sacks for charging are recommended
http://

SPONSORS:
www.circuitctsh.com/

450-278-0215