Originally posted by kidDynomite
tc3Guru, I have a Novak RX with a GTX. To make room, I used the 2 most forward servo mounting holes on the chassis. But I had to shave off about 1 - 1.25mm of the servo mounts and extend the slots on the servo ears toward the servo body. I also shave down the antenna mount on both sides and counter sunk a new hole next to the servo. Now there'e enough room to lay it all down and still have room for bigger pinions.
I had the same issue, I finally said screw it and flipped the receiver on its side, I have a ton of extra room now, and its less chance of glitching.