Originally Posted by
kms7852
I have the same set up. I recommend 17T. I used 15T and 16T before and it wheelied too much. Not easy to control. I recommend 17T. My 2200KV was fine at 120F after 6700mah of batteries. I live in Cali which is not that cold.
You really run a 17T pinion on a 2200kv motor with the Badlands MX38s (the 176 mm diameter ones, not the 149mm 3.8s)? And it really wheelies less, than with smaller pinions? I would of expect the opposite, ...and fried electronics with that set-up.