R/C Tech Forums - View Single Post - Getting back into the hobby
View Single Post
Old 01-24-2017 | 12:59 PM
  #6  
smrakocy
Tech Adept
 
Joined: Sep 2015
Posts: 118
Default

Originally Posted by T4driver
Would this also be a good choice?

http://www.horizonhobby.com/TEKTT2316?KPID=TEKTT2316&CAWELAID=3200119800000838 91&CAGPSPN=pla&CAAGID=37619207031&CATCI=aud-114021211707la-262641317410&gclid=CMrg9vSX2dECFU9YDQodF_8Aww

Just want the best bang for the buck. Should I just get the Tekin motor and run it with the Hobbywing XR8? Thanks again.
A lot of guys run Tekin stuff and like it, but I've also seen a lot of guys burning up RX8s. Granted, maybe that's just because you see a lot of guys running them, but who knows for sure. I've paired a Tekin truggy motor with a Hobbywing XR8 Plus for my RC8T3e because I wanted a truggy-specific motor for it and, at the time, Hobbywing didn't offer them. It worked out to about the same cost as buying the Tekin combo, but I'm glad I got the Hobbywing ESC. For my RC8B3e, I paired an SMC 1900kV with and XR8 and it's been great.

I will say that for my personal taste in throttle and brake feel, I did have to up the punch and dial out quite a lot of brake from the stock profile on the XR8 Pluses, but that's a very personal thing and easy to do with the program card or wifi adapter that's available from Hobbywing (which I would recommend if you do decide to go with the XR8 Plus). Hope that this helps and doesn't just add to the confusion. There are a ton of choices out there and it's tough sorting through them all. Good Luck!
smrakocy is offline