Hey guys,

I have two r10 ESC's (and the DSBR box), one of the esc's which I recently picked up used.

My primary r10 has the 111208MOD software on it, but the other one I picked up has the Stock 110728STOCK software on it.

Seems the only difference is the boost RPM and ACC setting, but when I went to Orion's site to try and download the firmware updates, it seems to be leading me to now where.

The Orion download link no longer works and links you to http://my.teamorion.com/. I made a profile, added products, etc. but nothing seems to be linking me to the download for the firmware.

Any thoughts, suggestions?

My goal would be to have both ESC's running same firmware, but if I can't make that happen, does anyone have any explanation of below:

MOD setting:
0 Boost Timing
10 Turbo Timing
24 Slope
.4 Delay

Would the Stock setting with 0 Boost Timing be the same set-up as listed below for the MOD? Was not sure if the Boost Timing is 0 is the Start RPM and ACC setting are void even though those are not set to 0.

Any clarification would be great.