Originally Posted by
masterfo
can i use a 3 cell liPo for this motor?
https://hobbyking.com/en_us/turnigy-...-approved.html
the motor spec says
"Max voltage: 7.4 (2S)
Max Current: 22A"
i hooked it up to my 3 cell with no load and it runs, will i damage it by running in 3 cells?
im going to run 3 of these motors with one 3cell LiPo
eventually you will kill the motor if you exceed its max voltage. It'll start getting hot and if you don't keep an eye on temps it'll overheat.