R/C Tech Forums - View Single Post - Tekno RC EB48.4 Thread
View Single Post
Old 01-11-2017, 05:44 AM
  #172  
jmcelroy42
Tech Master
iTrader: (10)
 
jmcelroy42's Avatar
 
Join Date: Jan 2014
Location: Wisconsin
Posts: 1,079
Trader Rating: 10 (100%+)
Default

Originally Posted by jmcelroy42
.

I noticed the inside of my front wheels rubbing on something, I was thinking that it was the front side of the outer hinge pin, but the scrape marks inside the wheel were pretty smooth so I think it may be somewhere else. I cant get it to rub on the bench but it is really close in a few spots so I imagine its happening when the wheels are flexing some.
A couple of times I had a weird thing happen that I cant figure out, the buggy would dart off in one direction (mostly to the right IIRC) a couple of times it was while i was on the brakes, and a couple under acceleration. I cant tell if it was because of the bump steer or a by product of the front wheels rubbing on something.
Here Is some pictures of what I am talking about with the front wheels rubbing on the outer hinge pin.
I am using DE Speedline Plus wheels, and I measured the I.D. to be around 80.5mm. I measured some AKA I had (79.5) and JC (78.5) so they have the largest inner diameter of the wheels I currently have at least.
I could move the hub spacer to the other side, but that will lengthen my wheelbase and change my ackerman. I was also thinking I could grind down the thread a bit for a little more clearance.
Anyone else notice this?
Attached Thumbnails Click image for larger version

Name:	20170109_193934.jpg
Views:	615
Size:	295.2 KB
ID:	1406005   Click image for larger version

Name:	20170109_194007.jpg
Views:	664
Size:	290.6 KB
ID:	1406006  
jmcelroy42 is offline