Originally Posted by
Gero
Exactly, normaly i should have a wide range of ride height settings in the front.
The problem is that the spring retainer of the front axle springs already touch the upper a-arm.
Already put it upside down, but that dont help much. To run bigger tires in front i need less spring preload.
Oh damn, easiest gear mesh fix ever!
Bigger spur gear and done.
Haha, so easy that i havent in mind...
Your spacing is not right on the knuckle. You must use 2.5mm under the knuckle, 2.0mm above the kuckle, 3 shims on top of the upper ball and the rest under the lower ball.
If you have some pictures, I can help you better.