Originally Posted by
kytr8matic
Hello guys.. i have a problem with the rear spinning on my tt02
My setup:
-Front shock/spring: tamiya #450/soft spring(red)
-Rear shock/spring:tamiya #900/ex.hard spring(white)
I use super mini cva shock
-tires sorex 40r with hard insert at front and medium insert at rear
-the arms are all stock except the turnbuckle for front toe
-front/rear diff: f packed with super heavy duty grease/r just a drop for lubricate
-bodyshell subaru brz R&D sport
-i use brushless 8.5t w/ 64t spur and 27t pinion
The car is spinning when i let off the throttle while entering the corner, so i must hold the throttle a little bit to prevent it to spin..
The track is high grip asphalt indoor
Any suggestion? Or what setup did you guys use
The first thing I would try is reversing your spring and shock oil setup. Normally you want the softer springs in the rear and harder in the front. Many people run the same shock oil all around or a lighter weight in the rear. When you go into the corner all the weight transfers to the front. With the softer springs in the front you will lose rear grip.