Originally Posted by
mxnickj
The info all says 12mm hex but from the looks of the spec sheet on the AE site no wheels will be included so I think most people are wondering if existing wheels will fit from other cars or are we at the mercy or AE/Jconcepts/Proline to come out with wheels specific to this car. I know that's my question anyway
There will be a 61mm and 2.2" wheel that will be available. The 61mm is the existing wheel, the 2.2" is new to accommodate a 12mm hex.
As mentioned before. If you really want to use a 10mm hex wheel you can, just drill a B44 hex out to 5mm for the axle and rock it. This method was used for early testing.