R/C Tech Forums - View Single Post - TAMIYA M-06 Thread
View Single Post
Old 11-26-2016, 11:11 AM
  #1862  
ruebiracer
Tech Regular
 
ruebiracer's Avatar
 
Join Date: Feb 2011
Location: Southern Germany
Posts: 382
Default

Originally Posted by rccartips
Spent a lot of time with springs/shocks. Neon softs to the ultra hard purple. Lap times where practically the same. Tires and traction compound made the noticeable difference for me.

I love the M06. Problem is Tamiya Regional racing in Asia mandates M-Grip tires front/rear. Toink.
Thanks Joel for the info on the springs!
In the beginning I also experimented with many spring types, but after adapting my Pro kit to "R" spec I found always the black springs (yellow rear and red front) the best combo, also the 1,3mm 3 hole pistons in the rear.
This setup works always very good, if the tire choice is o.k.!

By the way, is M-Grip mandatory for M05, too?
In Germany, tire choice is limited to the spec slick tyre, also not best choice for M06 in my eyes. But the only focus on the FWD cars, Iīve the feeling.
Thatīs why I do not drive Euro-Cup series. (at least one of the reasons).

Br,
Matthias
ruebiracer is offline