View Single Post
Old 11-18-2016, 09:30 AM   #1069
Tech Adept
Azzkikin's Avatar
Join Date: Apr 2016
Posts: 178

I have modified some B6D wing mounts to fit. If you can see, I have 4 screws and not just the two with the hooks on the std mounts. Doing this does one of two things for me.
1, allows the wing to sit lower in the normal mounting fashion
2, allows me to invert the mount and run the wing really low

Running stock, the wing only provides in air control and some side help for bite. So hiding it behind the shock tower saves my wing as I tend to go through them kinda quick. And spending $10-14 on a wing every couple of weeks was a little much. They seem to be much lighter material than PL or JC ones. So I started to form my own, now they are $1 in material.

I switched to the aluminum mount so it was easier to remove the control link for diff adjustments. Another reason I run the ball stud facing backwards.
Team Associated - Axial - Reedy - LRP - SMC - Hobbywing - JConcepts - Proline
Azzkikin is offline   Reply With Quote