Originally posted by jag
I just picked up a used CRC Carpet Knife V3.1 and was wondering if anyone had a good setup for a fairly high bit asphalt track. The car was used for indoor carpet racing and is pretty tight/stiff. I am new to electric 1/12 so any help would be appreciated.
Thanks,
jag
Jag, Try blue side springs, an AE RED center spring 50 wt. oil in the shock, med. LOSI hydrdrive fluid in the tubes. .022 front springs. Parma Pink Rears, Purple Fronts. If the track is tight run 2 degrees caster, if it has alot of sweeping sections try 4 degrees. Camber, set so the front tires wear even. This should be an okay place to start.