R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 09-22-2016 | 11:24 PM
  #44851  
silden's Avatar
silden
Tech Fanatic
iTrader: (12)
 
Joined: Dec 2012
Posts: 982
From: Los Angeles
Default
Originally Posted by Flygio
where do you measure the turning circle? internal wheel or external?
Or you can use a setup station to set the same steering angle.
I usually set it to 24 on the inside wheel. You will have the same steering trow on both sides. You can then use DualRate, if the turning circle is still to tight.

Both methods will insure the correct turning circle on the end.
Last edited by silden; 09-22-2016 at 11:26 PM. Reason: auto replace errors removed
silden is offline  
Reply