R/C Tech Forums - View Single Post - Tekno RC EB48.3 Thread
View Single Post
Old 09-19-2016 | 04:11 AM
  #2254  
jmcelroy42's Avatar
jmcelroy42
Tech Master
iTrader: (10)
 
Joined: Jan 2014
Posts: 1,079
From: Wisconsin
Default

Originally Posted by deceit
I don't feel like mine were really that tight... but I would stop after a run and the strap would be cut/broken where it meets the chassis. I don't pull on them hard, just enough so the battery isn't moving around. :/

3 in 1 week is too many though...
I would check and make sure there are no sharp edges on the battery tray where the straps go thru. Use some light sandpaper or a hobby knife and round the edges of the plastic a bit. also make sure you are using both front slots or both rear, if you put the strap thru both outside slots then your battery will be sliding back and forth and may put extra stress on the straps.
jmcelroy42 is offline