R/C Tech Forums - View Single Post - Team Associated B6 & B6D thread
View Single Post
Old 08-25-2016, 10:40 AM
  #2819  
rvrslt1
Tech Fanatic
iTrader: (35)
 
rvrslt1's Avatar
 
Join Date: Jan 2015
Location: Torrance CA
Posts: 968
Trader Rating: 35 (100%+)
Default

Originally Posted by lyons238
need more info like are you pushing on power or off power? entry mid or exit? but generally you could try things like:

- add weight to front or remove weight from rear
- reduce front roll center
- play with suspension, maybe your rear is too soft or front is too stiff
- what is your camber set at and camber gain?
- increase rear droop
- 3 gear or 4 gear tranny? laydown or stand up? laydown will reduce a push



i was on board with you until you said turn wheel more. turning the wheel more when your car is pushing wont solve the problem. if your going to be smart, at least be intelligent.
Thanks for the help. Will try to turn a little more

3 gear lay down. Brass C mount AE front bulk head Gray front 32.5 oil 2x1.6 green rear 30wt oil green spring 2x1.7. Schelle rear hubs 22mm front and back ride. -1 camber front and rear. Clay track with proline electrons
Real close to Kurt's set up from Schelle

Thanks
rvrslt1 is offline