Originally Posted by
venom54
The BANDIT has heaps more torque than the TP PV2. That's why it has less KV and gearing is completely different. You cannot come close to the FDR used on a BANDIT to a PV2.
Keep us informed as to your results
Cheers,
Ren.
Hi guys,
I have changed my FDR to 3.52 with about 2.5 timing on the motor. It has slightly more torque as compared with my previous 3.33 FDR. However, I noticed that the breaking response is slower than my previous motor, given the same setup and tyres. I have set my HobbyWing XR10 Pro 160A ESC's drag break to 0% and break control to 100% (the max), but the break response doesn't seems to have much improvement. I supposed it has something to do with my Team Powers Plutonium v2 17.5T motor since the break response is slower after changing to this motor. Any idea what can I do to improve the break response (e.g. Change the default rotor to a bigger or smaller diameter)? I don't feel like changing my current Team Powers motor since I just bought it and it's a waste if I switch to another new motor of different brand.