Originally Posted by
Kakaru
Most of the guys (running 17.5T stock class) in my local track are running HobbyWing's Bandit 17.5T motor, which is also an outlaw motor but with lesser rpm (i.e. 17.5T of 2300kV) than the Team Powers Plutonium v2 17.5T 2400kW. I'm just thinking that the speed running on a 40 meter straight path will be decreased significantly by changing my FDR to 3.6 or 3.5 with default 0 degree timing on the motor, as my current FDR is 3.38. Is there any good way to have a higher acceleration after exiting from corners and at the same time, the car will still be fast when running on a straight path? Thank you guys.
You can not compare the HW BANDIT motors to the TP PV2. Completely different !!!!!! Don't even go there......
Try the suggestions and add timing if you are allowed, which you are allowed.
Even 3.5 as a starting point. And as erchn said, Try it and report back if it does not work.
You will loose nothing but gain knowledge.....
Cheers,
Ren