R/C Tech Forums - View Single Post - Servo overheating
Thread: Servo overheating
View Single Post
Old 08-05-2016 | 08:24 PM
  #11  
disaster999's Avatar
disaster999
Regional Moderator
iTrader: (1)
 
Joined: Aug 2001
Posts: 4,285
From: Hong Kong
Default
Originally Posted by raved007
My servo is Blue Bird BLS-46A and ESC orion r10.1
Specification:
Torque @6V 32.9 KG-CM/456.9 0Z
Torque @ 7.4 421.1 KG-CM/ 584.08 oz
Torque @ 8.4 47.5 KG-CM/659.8 oz

I am assuming have a lot of torque after a few minutes running it stop and the temperature of the servo is 140's but the ESC still running. Also removed the steering linkage is very loose not tight. After turn off the ESC servo it works again.
He did mention the servo stopped running after a few mins and reaching temps of 140
disaster999 is offline  
Reply