R/C Tech Forums - View Single Post - Mixing digital and analog servos?
Thread: Mixing digital and analog servos?
View Single Post
Old 07-14-2016 | 04:51 PM
  #3  
mercfocus's Avatar
mercfocus
Tech Addict
iTrader: (3)
 
Joined: Jan 2014
Posts: 600
From: Yuma, AZ
Default
Originally Posted by Roelof
No problem, but some things to keep in mind:

1) analog servo's do not work on a high framerate. If you have a high end transmitter set it back to a normal (20mS) framerate.

2) digital servo's can draw some current. The older AM receivers can have an internal BEC like theFutaba R122-JE which probably can not handle powerfull digital servo's.
The digital servo I hooked up was a Spektrum 6020, not HV, only 6v to an Airtronics MX3 so that's probably ok I guess.

I'll have to check on it with the MT4 if I can set up the frame rates separately: T/B as one fr setting and steering as another. That would be cool if I can.

I tested it last night and it seemed to work but that was just on a table.
mercfocus is offline  
Reply