Originally Posted by
rekim
i finished building now and it is really tight fit for the wires when trying to put the body on. i had to tie down every wire because they were hitting the body and it wasnt sitting flush. i did eventually get it. i put a 13.5 motor in it and it feels a bit slow to me.
overall though i love the buggy. it seems to handle pretty well. a little better than my xb2 but i have my xb2 pretty dialed for my driving style.
hopefully it doesnt rain tomorrow and i get to drive it. it was so late by the time i finished building it that i only got to drive for 10 minutes or so.
1 addtional thing i wanted to ask. i hit the throttle with all 4 wheels in the air and one wheel moved up and down. it drives fine when its on the ground, just when the arms are fully extended down, did it do this
Check to make sure the out drive on the wheel that shake has the small pin in the right hole. When I built mine I put the pin in the larger hole on part number 365230 and the wheel shook a lot
G Wood