Originally Posted by
Tim3
So you have this ordered and it comes tomorrow?
Let us know how you like it and after run.
HBL575SL (0.07 sec/60° - 233.31 oz/in @8.2V)
HBL575SL
Details
SKU MKS-HBL575SL
Dead Band 0.0008ms (Default)
Control System +Pulse Width Control
Working Frequence 1520μs / 333hz
Operating Voltage 3.5 ~ 8.4 Volts
Operating Temperature Range -10 to + 60 Degree C
Operating Speed (6V) 0.10 sec/60° degrees at no load
Operating Speed (7.4V) 0.08 sec/60° degrees at no load
Operating Speed (8.4V) 0.07sec/60° degrees at no load
Stall Torque (6V) 138.87 oz/in (18 kg/cm)
Stall Torque (7.4V) 184.70 oz/in (22 kg/cm)
Stall Torque (8.4V) 233.31 oz/in (24kg/cm)
Motor Type Brushless Motor
Potentiometer Drive Indirect Drive
Bearing Type 12x8 mm Double bearings
Gear Type Chrome-Titanium alloy gear
Dimensions 40 x 20 x 23.1 mm
Weight 53.51 g
Thanks guys!
And yes, that's the one. Except Amainhobbies has the specs wrong. i thought it was going to do .08 sec at 6v. Does anyone know if .10 should be fast enough for 2wd buggy racing? All my servos have been under .1. Also, how many ran 7.4v over 6v? I have a Tekin RSX ESC.