Was googling a bit and found the specs on the RC4 transponder. Some of this is interesting to compare with the Cano transponder.
Code:
Specifications
Dimensions (WxLxH) : 16x19x6 mm (approx. 0.7”x0.8”x 0.2”)
Weight : 4 g.
Weight incl. Holder : 4.7g.
Humidity : max. 90% relative
Max. speed : 120 km/h / 75 mph.
Temperature range : 0-50 c / 32-122 F
Signal transfer : magnetic induction
Code resolution : 1.5 ms
Transponder position : max. height 15 cm / 6’’
Power : Feed from free receiver channel (ch3 or batt)
Connection Plug : connect using a standard Servo plug
Power consumption : 19mA @ 6VDc
Operating voltage : 2.8 – 16 VDC
Wire insulation : Aerospace/MIL-spec high-temp PTFE (Gasoline/Nitro resistant)