R/C Tech Forums - View Single Post - Pro 10: 235mm Le Mans Prototype Pan Car Discussion
Old 06-03-2016, 07:22 AM
  #3141  
Pro10noob
Tech Elite
iTrader: (13)
 
Pro10noob's Avatar
 
Join Date: Apr 2009
Location: The Netherlands
Posts: 2,199
Trader Rating: 13 (100%+)
Default

Base setup:
40sh front tires/35sh rear tires
Centre shock a TC shock like the TRF with for starters a Tamiya yellow spring and 450 Tamiya oil in it.
Side dampers i got the Silva with the Asso blue spring on them from the 1:12 cars
1MM pod droop
Ride height front 5MM rear 5.5MM
Front springs: CRC green side springs
Body: Team Saxo
ESC Team Orion 64 degrees timing no turbo
Motor: Team Orion VST Stock 10.5 with almost no timing on the endbell
Pinion between 19 and 22 and spur 81
Tires diameter rear between 57 and 60
Hyperdrive inline axles at the front with all the shims on the inner side.
This is a 235mm car with a T-bar.
For a link car i use the Tamiya blue spring on the centre shock for starters.
Hope this is any good for starters setup.

Regards Roy
Pro10noob is offline