R/C Tech Forums - View Single Post - 540 Run In
Thread: 540 Run In
View Single Post
Old 03-17-2005 | 02:57 AM
  #68  
NOZ69's Avatar
NOZ69
Tech Adept
 
Joined: Jan 2005
Posts: 198
From: Nowra (Sth Cst NSW) Australia
Default Is this correct..?
Did a search for rollout charts/equations & this is what i found & calculated.

Final Ratio : 1 divided by 2.5 = 0.4102

Pinion / Spur : 35 divided by 65 = 0.5384

Wheel Circum : 62 divided by 3.1416 = 194.7792

Rollout = 194.7792 x 0.5384 x 0.4102 = 43.01mm

SO is this right..

Cheers
NOZ69 is offline  
Reply