R/C Tech Forums - View Single Post - Tekno RC EB48.3 Thread
View Single Post
Old 05-25-2016 | 11:32 PM
  #1676  
werner sline's Avatar
werner sline
Tech Elite
 
Joined: Dec 2012
Posts: 2,996
Default

you took 3.7v for your lipos : I took 4.2v, but that's a good question : which voltage do you take for calculations ?

when will you test you 6s setup ?

Originally Posted by NoobRacer
How did you get those numbers? I got.

4s = 14.8 x 1900 = 28,120rpm
6s = 22.2 x 1350 = 29,970rpm

So my guess would be if a 4s is running 17t I should be running 18t/19t?

Nvm, just looked at your math, no matter the difference in rpm numbers we came up with both came to the same assumption that it will be to AT LEAST one tooth high or two.

Yes, 6s is not common because the roar rules are 4s, I club race and tend to some big races but don't ever plan to podium so I chose the 6s set up so it's less wear and tear on my esc and battery. The track owners or roar members aren't buying my equipment for me so I'd rather use my money wisely instead of smoking my esc or puffing batteries.....I seen it happen quite a few times in my short time racing.
werner sline is offline