View Single Post
Old 05-12-2016, 04:40 AM
Tech Elite
iTrader: (79)
sg1's Avatar
Join Date: Aug 2004
Location: Ohio
Posts: 3,197
Trader Rating: 79 (100%+)

Originally Posted by j.d.roost View Post
Got my car dialed in for the rug (just in time for outdoor season...).
Past few weekends have resulted in Tq and wins at my local (and points series p1).I felt very "locked in" today with my new setup. (old crc carpet). Thanks for posting your setup guys.

My setup.
30k in the tubes, thin grease on the pins,tamiya gold front springs (or a.e. #18 depending on grip), 1.5 camber and 9 caster,stock side springs,500 cst oil in the shock,xray 2.7 main spring,stock front shims with the shorter ride height standoff (McMaster parts I think).
1mm rear pod droop. x1 2016 body

Car is great...driver needs to stop tapping. I am a lot harder on the car then you "fast guys"...everything seems to be holding up well so far.
Did you lower the upper a-arms as well?
I put 2mm shorter lower standoffs in and then lowered the upper A-Arms 4mm and lowered the bell crank 2mm.
It changed the roll center and increased corner speed on the new CRC carpet.
sg1 is offline  
Reply With Quote