R/C Tech Forums - View Single Post - Set up for Parking Lot Tracks using Rubber Tires
Old 07-19-2002, 08:32 PM
  #5  
squizzytaylor
Tech Master
 
squizzytaylor's Avatar
 
Join Date: Jun 2002
Location: Toronto NSW Australia
Posts: 1,119
Default Set-ups

Hows goin no gas
assuming you have rear toe adjustment you can try this I run on a medium grip parking lot track and have found this pretty good
the castor and rear toe are personal choice as I like to drive hard throttle and let the car slide on the approach into a corner and bury the throttle just before the apex. Ride height is usually around 5mm. Give it a go and play with it if the steering is a little too relaxed for you move the spacers on your top a-arm forward untill your happy.

Front;
1deg toe out
1 deg camber / \
All castor blocks at front
1000wt mugen diff oil
Take off cs32 tyres
60% Dual rate
60wt shock oil single hole piston

Rear
2.5deg toe in
1deg camber / \
3000wt mugen diff oil
Take off cs 27 tyres
60wt shock oil 2 hole piston

.................................................. .................

"this aint no Kyosho.........it's a goddamn missile"

squizzytaylor is offline