R/C Tech Forums - View Single Post - Rex paloma Ltd edition
View Single Post
Old 04-26-2016 | 05:42 PM
  #74  
Vintageguy
Suspended
iTrader: (63)
 
Joined: Dec 2014
Posts: 1,517
Default

Originally Posted by hobbstimothy
So i see were you guys are talking about power my question is are any of you guys getting ten main run times if so how and the other problem is if i barely touch the throttle my motor will idol high for a few seconds then drop. Why is this. I run the 6.5 restrictor power is fine and i got2 gallons on it with metal pinch still at the top
1. Make sure carb is closing to appropriate gap quickly (not closing slowly).
2. LSN (low speed needle) is a bit lean.

I have modified several of these and the racers that are running them (on race tune) with 9853 & 9901 pipes are getting 10.5-11min. I raced with a Paloma (modded) when it first came available. I paired it with a 9901/ 41020 and got 12min on race tune. Track was semi tight with high traction.
Vintageguy is offline