View Single Post
Old 03-17-2016, 12:45 PM   #3270
mikeinsocal
Tech Adept
 
Join Date: Apr 2013
Posts: 223
Default

On the shock rebound issue, I run emulsion myself so not speaking from experience but I have seen from time to time that air will enter the shock through the o-rings at the bottom of the shock body in the cartridge. Maybe just check that everything is seated properly in the ones that are giving you a problem and the o-rings are not torn. Sometimes they can get a tare from the thread on the shaft during installation. Good luck figuring it out and let us know what you find.
mikeinsocal is offline   Reply With Quote