i have a vorza with a 4pls futaba radio. i purchased a gt power light kit. the led kit has 12 leds and split into channel 1 for steering and channel 2 for throttle. my issue is as follows. everything works perfectly but i would like to have the ability to turn the lights on and off. only way for me to do this is to use my electric switch on channel 3 and channel 4. i program the radio accordingly and now i can turn the leds on and off at will. The issue is that since channel 3 and 4 do not receive the same signal from channels 1 and 2 i know lost the reactive led which simulate turning and braking. i can turn the leds on and off but nothing else. i tried to google this problem but let me tell u... figuring out a way to get google to respond correctly to a led rc issue is dam near impossible. i get all kinds of stuff that isnt helpful so i turning to the forum to see if anyone ran into this issue. so in all.... i would like to turn my leds on and off at will with still keeping the reactive driving from the led kit which shows turn signals and brakes when they are used.