R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
View Single Post
Old 02-28-2016, 06:59 PM
  #3085  
twistedneck
Tech Adept
iTrader: (1)
 
Join Date: Jan 2016
Location: Dearborn, MI
Posts: 150
Trader Rating: 1 (100%+)
Default

Originally Posted by Ruffdog1
So what springs and oil do you like for the front? I know that a lot of guys run pink front. I thought the green fronts were too stiff. Thanks!!
I run pink rear springs 30 wt losi oil inner lower shock attachment hole, front black springs 25 wt oil outer shock attachemnt hole for a little more turn in since the Tekno is stable enough you can add to the steering a little bit. same thing could be done by limiting travel by the droop screws in front. if it was oversteering i'd revert to the inner lower shock attachment holes.


its a nice sized indoor track BUT if I were going to a faster outdoor track with more g-forces i'd up the spring rates and damping a couple notches.. possibly go back to the 8x1.2 pistons to land big jumps better.. and of course uniformly larger stabars to counter the high speed roll forces that are larger.
twistedneck is offline