R/C Tech Forums - View Single Post - Mugen MTX-3
Thread: Mugen MTX-3
View Single Post
Old 03-08-2005, 10:07 PM
  #14767  
RClover
Tech Fanatic
 
RClover's Avatar
 
Join Date: Jul 2002
Posts: 869
Default Re: front spool configuration

Originally posted by xtreme888
Hi,

I was running the front one way with a adjustable rear diff with stock pully. Changed over to front spool..the car have a sharper braking and also launches very fast out of corners...lap time was down 0.3 sec compared to a front one way. Rear diff oil is 10,000 wt (mugen), but i have i can tighten the rear diff to make more stiffer.

Found that the stiffer rear diff will help the car powers out of corner tighter. Last weekend ran the car in this configuration until the rear started sliding coz the rear tires have worn down to the rim !!!! I never true my tire...as long as the front is smaller than the rear !!!Nevertheless, the car handled perfectly.....try it !!!

Xtreme888
did you modify the fr one-way to become a spool?
RClover is offline