Originally Posted by
N15M0
What droop are you guys using on the pro 5? I've seen quite a few setups posted on petitrc and many are using around 9mm front 8mm back. Compared to the other cars which I've, they're only running 5mm front 4mm back. Thanks.
The setup sheets quoting 9mm and 8mm are measured with the car sitting flat on the setup board and then the 9mm is measured from the board to the point on the hub hinge pin using a ruler or calipers.
Most other cars are quoted around 5mm with the car on 10mm blocks and a stepped droop gauge.
I am still using the kit 9mm and 8mm indoors on carpet...