I tried that, but my receiver has no power. I know my receiver isnt dead, because I disconnected the ESC, and only hooked up a servo and a separate battery, reset the spektrum. and the servo works no problem. But when i disconnect that separate battery, and reconnect my ESC and flip the switch, its back to nothing. Just the solid LED on the esc, no power to the receiver.
I checked for Voltage on the connectors of the ESC that go to the Receiver. Im getting - on the black wire, 0 on the red. and 3.2 on the white wire. is this common ?
Last edited by darkblood; 01-23-2016 at 07:45 AM.