Originally Posted by
yifuqiao
Does anyone have problem that the rear toe aren't exactly the same? Yesterday, I put my car on setup station (integy 1/10 setup station).
I found rear toe has about 0.5 degree difference.
I know rear toe are not adjustable, does this mean I might have bent anything?
Check the axles are fine and there is no movement. The rear toe should be the same for both wheels.
Other things to check are
The ball connector at the top of the rear hub might me bent.
The rear hinge pin
However I would mostly say that it is going to be down to movement in the rear axles if they are not shimmed.