Originally Posted by
Steve Weiss
Glenn,
Sorry I didn't get to this until now.
Most of the time we run 3 in or 2 in on the front. We sometimes play with a little arm sweep there as well.
We have started experimenting with wider front pivots here and there, but you won't go wrong with the 2 or 3 in setup
Thanks, you guys are the best. I'll try 2 in and see if I like it. As far as the rear arms, I was running three out on the rear mount and two out on the front mount to get a little more toe in. But it really swung the arm forward, so I decided to move it back to reduce the dog bone angle. I went with 6mm of spacers in front of the arm and 9mm behind the arm. I think you guys were recommending 5mm in front of the arm and 10mm behind.
It will be interesting to see if I like the set up. I'm an old guy, so normally I like for the rear end to be planted. Hopefully I'll like this setup.
Thanks,
Glenn