Originally Posted by
gticlay
You need the ones listed below that make the car 245mm width if you want to use the team setup sheets. Bent made this, not me so he gets credit for spending so much time doing this for us.
Width using 12mm wheel hexes and Xray 12mm wheels:
Front:
#365354 -0.75mm = 242mm
#365353 0mm = 243,5mm
#365355 +0.75mm (1 stripe) = 245mm
#365356 +1.5mm (2 stripe) = 246,5mm
#365357 +2.25mm (3 stripe) = 248mm
#365355 +3.00mm (4 stripe) = Not enough threads on axle to secure the wheel nut.
Rear:
#365353 0mm = 243mm
#365355 +0.75mm (1 stripe) = 245mm
#365356 +1.5mm (2 stripe) = 247mm
#365357 +2.25mm (3 stripe) = 249mm
#365355 +3.00mm (4 stripe) = 251mm
Link to BentKa Post:
http://www.rctech.net/forum/14256486-post9212.html
this info is all great if you are using xray hexs but I am not. I am using exotek hexs that they tell us to use on the very 1st page of this trend. My question is this, Is the 1st page right telling use that the exotek 5.5mm and 7mm with tlr wheels the right length? if so great because I bought them going on what they posted, if not right then remove that so people dont waste money getting the wrong stuff. If needed I guess Ill spend the money and get the xray ones but going by what was posted i went with the exotek. thanks