Originally Posted by
Cain
in general I would say yes.
the only thing I woudl say to watch for is that the Tekno ET48 depending on your track size its possible that you don't like the gearing range a 2000kv motor may provide. So guys went to the 1700kv instead on 4S due to this.
Also, if you are running an esc other than the Tekin RX8 in the ET48, you may not like the space between the motor and the ESC (Viper VTX8 and similar sized ones come to mind). I ended up doing a buggy sized motor in there for a bit, the Viper 1900kv motor worked well and Viper didn't have a problem with it being used in a truggy where Tekin wasn't on board for that. then I went to an RX8 Gen 2 to give the 2000kv motor a try.
heck, I may use the truggy motor in the buggy I have hear lol.
I moved that orion long can 2100 into my eb48.3 and am loving it . Got the rpm of the 2050 guys with the smooth , "linear" power band of the 1900. Have to pay attention though , quick grabs of throttle and lots of grip upset the car a bit more